Manual information
APP: Arenti
This manual applies to cameras using the Arenti app
Quick start guide
- Packing list
- Device configuration
- Product description
- Legal notice
Packing list

Camera *1

Screws *3

USB cable *1

Quick start guide *1

Reset key *1

Power adaptor *1
Product description

Notice
To reset the device, press and hold the reset button for 5 seconds.
The camera beeps when the operation is complete.
Flashing red light (slow) | Waiting configuration |
Flashing red light (fast) | Searching WiFi network |
Fix blue light | Camera connected to WiF¡ |
Flashing blue light | Access point mode |
Camera configuration
Step 1 Turn on your camera by plugging in the power adapter.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download My arenti app from the Apple Store or Android Play Store depending on your device.
Step 4 Launch My arenti app and sign up for the first use.
Step 5 Follow the steps below to add your camera, then follow the on-screen instructions.

Note
If you have multiple cameras, please follow step 5 again to add devices one by one.
To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.
For more information, please download the user manual at www.arenti.com
Specifications
Sensor type | 1/ 2.9″ CMOS |
Min. Brightness | Color 0.01L .ux@F1.2 |
Black and white 0.001Lux@F1.2 | |
Resolution | 2 Mega pixels |
L ens | 2 4mm F2.0 |
Shutter | 1/25~1/100,000 per second |
Infrared | High power L ED with ICR |
Infrared distance | 10 mètres |
Wide Angle | 145° |
Video compression | H.264 |
Bit rate | 32Kbps~2Mbps |
Max resolution | 1920 x 1080 |
Framerate | 1~25 per second |
Picture settings | Support HD/SD;support flip; |
Storage | SD card(Max 128G) |
Audio | Two-way audio |
Protocols | HTTP,DHCP,DNS |
WiF¡ standard | IEEE802.11b/g/n |
Frequency | 2.4 GHz ~ 2.4835 GHz |
Bandwidth | 20/ 40MHz |
WiFi encryption | WPA-PSK/WPA2-PSK |
Security | AES128 , |
Working temperature | -20’C~50’C |
Power | DC5V,1A |
Consumption | 4, 5W MAX |
Size(mm) | 52,1X50X94,9 |
IP Protection | IP65 |
Battery | 6700mA |
Model | TPA-46B050100UU |
Input voltage | 100-240Vac |
input frequency | 50-60Hz |
Output voltage | + 5Vdc |
Output current | 1A |
Output power | 5W |
Eficiency | 73,62% |
No-load Consumption | < O.1W |
I have plugged in my camera to a wall socket with the device provided as the message I received from the camera was that the battery was low. This morning I am still receiving the same message. Plugged in again. Red light solid on side of camera. Why isn’t it charging?