Laxihub Wifi Camera Model W1 Arenti APP User Manual

Flashing red light (slow)	Waiting configuration
Flashing red light (fast)	Searching WiFi network
Fixed blue light	Camera connected to WiFi
Flashing blue light	Access point mode

Installation

Camera configuration

Step 1 Turn on your camera by plugging in the power adaptor.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Arenti app from the App Store or Google Play depending on your device.
Step 4 Launch Arenti app and sign up for the first use.
Step 5 Follow the steps below to add your camera, then follow the on-screen instructions.

Note

If you have multiple cameras, please follow step 5 again to add devices one by one.
To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.

Specifications

Sensor type	1/ 2.9″ CMOS
Min. Brightness	Color 0.01Lux@F1.2
	Black and white 0.001Lux@F1.2
Resolution	2 Mega pixels
lens	2.4mm F2.0
Shutter	1/25~1/100,000 per second
Infrared	High power LED with ICR
Infrared distance	10 meters
Wide Angle	145
Video compression	H.264
Bit rate	32Kbps~2Mbps
Max resolution	1920 x 1080
Framerate	1~25 per second
Picture settings	Support HD/SD;support flip;
Storage	SD card(Max 128G)
Audio	Two-way audio
Protocols	HTTP,DHCP,DNS
WiFi standard	IEEE802.11b/g/n
Frequency	2.4 GHz~ 2. 4835 GHz
Bandwidth	20/40MHz ;
WiFi encryption	WPA-PSK/WPA2-PSK
Security	AES128
Working temperature	-20’C~50″C
Power	DC5V,1A
Consumption	4,5W MAX
Size(mm)	52,1X50X94,9
IP Protection	IP65
Battery	6700mA
Model	TPA-46B050100UU
Input voltage	100-2 40Vac
input frequency	50-60Hz
Output voltage	+ 5Vdc
Output current	1A
Output power	5W
Efficiency	73,62%
No-load Consumption	< 0.1W