Wansview<\/a><\/p>\n\n\n\nModel\uff1aQ3,Q3S<\/p>\n\n\n\n
This manual applies to cameras using the\u00a0Wansview\u00a0app<\/p>\n\n\n\n\n\n
Download the App (Android and iOS)<\/h2>\n\n\n\n Go to the App Store or Google Play to search and download “Wansview” APP to your supported device .Or scan the QR code below to get the app.<\/p>\n\n\n\n <\/figure>\n\n\n\nWhat’s in the box?<\/h2>\n\n\n\n 1*A Camera(include Antenna) 1*An Installation Guide 1*A Power Adapter 1*Mounting Accessories 1*A Network Cable<\/p>\n\n\n\n <\/figure>\n\n\n\nconnections<\/h2>\n\n\n\n <\/figure>\n\n\n\n <\/figure>\n\n\n\nPower on Camera<\/h2>\n\n\n\n Please make sure the camera is in the same room, close to the router, before performing the setup. Then, using the included power supply, connect to Power.<\/p>\n\n\n\n <\/figure>\n\n\n\nTips: You can relocate it to where you want after it is all set up. You just unplug it and move it to the new location and plug it in, the camera will connect to your WiFi automatically, no need to set it up again.But please make sure the new location will not be far from your router.<\/p>\n\n\n\n
Connect Phone with 2 4G WiFi<\/h2>\n\n\n\n Connect your mobile phone with 2.4G WiFi. (5G is not supported for the camera)lf you are using a dual band router, make sure your 2.4G WiFi name is different from your 5G one.<\/p>\n\n\n\n <\/figure>\n\n\n\nMethod 1: Add camera via WiFi mode<\/h2>\n\n\n\n 1. Select [Add IP Camera]<\/strong>, and tap + to add camera<\/p>\n\n\n\n2. Select [Add cameras via WiFi mode]<\/strong><\/p>\n\n\n\n3.Scan the QR code on the back of the camera<\/p>\n\n\n\n <\/figure>\n\n\n\n4. Hold Reset button about 3- 5 seconds until you see the blue light is on<\/p>\n\n\n\n
5.Name the camera, then[Next]<\/strong><\/p>\n\n\n\n6.Input your WiFi password and click on[Connect to WiFi]<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\n7. Use the camera to Scan the QR Code, Click on [Blue light has quickly flashed] when the blue light flashes quickly.<\/p>\n\n\n\n
8.When the camera receives WiFi signal, it will sound 2 beeps.<\/p>\n\n\n\n
9.You should see it says online. Congratulations! Your camera is all set up. Click on the image to enjoy viewing and controlling it now.<\/p>\n\n\n\n <\/figure>\n\n\n\nMethod 2: Add camera Via Wired Method<\/h2>\n\n\n\n 1. Select[Add IP Camera]<\/strong> and tap + to add camera<\/p>\n\n\n\n2 Select[Add Cameras via wired method]<\/strong><\/p>\n\n\n\n3.Tap [Next]<\/strong> if the camera is connected with power supply and ethernet cable.<\/p>\n\n\n\n <\/figure>\n\n\n\n4.Scan the QR code on the bottom of the camera.<\/p>\n\n\n\n
5.Name the camera, then [Next]<\/strong>, Connect Success will appear, you could tap [Cancel]<\/strong> if for wired connection. For WiFi Setting, please refer to P12<\/p>\n\n\n\n6.You should see it says online. Congratulations! Your camera is all set up. Click on the image to enjoy viewing and controlling it now.<\/p>\n\n\n\n <\/figure>\n\n\n\nWiFi Setting<\/h2>\n\n\n\n 7. To Set up WiFi, Please Tap [OK]<\/strong>.<\/p>\n\n\n\n8. Select your home 2.4G WiFi.<\/p>\n\n\n\n
9. Input WiFi password correctly, then [Next]<\/strong>.<\/p>\n\n\n\n <\/figure>\n\n\n\n10. Set WiFi success appear, please tap [OK]<\/strong>. And you could unplug the network cable .<\/p>\n\n\n\n11.You should see it says online. Congratulations! Your camera is all set up. Click on the image to enjoy viewing and controlling it now.<\/p>\n\n\n\n <\/figure>\n\n\n\n