Add camera in Lan<\/strong><\/h3>\n\n\n\n1) Tap to add camera <\/p>\n\n\n\n
2) Search the camera in Lan, DID number will be searched if use DID(P2P) to search, while Search IP will get IP Address <\/p>\n\n\n\n
3) Double-click the searched camera, and the camera information will be filled automatically. <\/p>\n\n\n\n
4) Input the camera\u2019s password (default is 123456). <\/p>\n\n\n\n
5) Hit \u201cAdd\u201d. <\/p>\n\n\n\n
6) \u201cSave Success\u201d will appear, click \u201cOK\u201d to close the dialog.<\/p>\n\n\n\n <\/figure>\n\n\n\n1.2 Manually add camera (suitable for outside network)<\/strong><\/h3>\n\n\n\n <\/figure>\n\n\n\n1) Tap to add camera <\/p>\n\n\n\n
2) Manually input the camera information. Tips: DID number can be checked from stickers on the back of the camera. You can check the DID from Wansview app If you have already added the camera on the mobile phone \u201cwansview\u201d app. <\/p>\n\n\n\n
3) Hit \u201cAdd\u201d. <\/p>\n\n\n\n
4) \u201cSave Success\u201d will appear, click \u201cOK\u201d to close the dialog.<\/p>\n\n\n\n
Play\/Stop Video<\/h2>\n\n\n\nPlay Video<\/strong><\/h3>\n\n\n\nWhen the camera is connected, double-click the camera or right-click and choose \u201cPlay\u201d to play the video.<\/p>\n\n\n\n <\/figure>\n\n\n\nStop Video<\/strong><\/h3>\n\n\n\nClick to stop the video or right-click the camera and choose \u201cStop\u201d<\/p>\n\n\n\n <\/figure>\n\n\n\nVideo Interface<\/strong><\/h3>\n\n\n\n <\/figure>\n\n\n\nCamera Settings<\/h2>\n\n\n\nEdit Device<\/strong><\/h3>\n\n\n\nRight-click the camera info and select\u201dEdit Device\u201d, here can change the Device Name and Group; and edit the username and password if input wrong or changed; delete the device or Save the parameters you have edited.<\/p>\n\n\n\n <\/figure>\n\n\n\nAdvanced Settings<\/strong><\/h3>\n\n\n\n <\/figure>\n\n\n\nOn the Advanced Settings, user can check camera firmware version, set up time, create other account for operater or Visitor, set up WiFi and SD card recording etc.<\/p>\n\n\n\n
Device Info<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nUser can check the camera status and Mac address, and check the camera\u2019s firmware version.<\/p>\n\n\n\n
Time Setting<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nUser can select a specific time zone, or sync the time to PC or to a NTP Server<\/p>\n\n\n\n
User Setting<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nUser can create other accounts for family member or friends in User Setting. <\/p>\n\n\n\n
Add an account with user name and password, and give a right to this account. <\/p>\n\n\n\n
Tips: Administrator: All settings can be edited Operator: Can operate all the icons (such as listen, talk, flip\/mirror) on the live video page. Visitor: Can only watch live video.<\/p>\n\n\n\n <\/figure>\n\n\n\nUser can also edit the account information, such as change the user name and password and change the role for each account, then Save. And Delete some accounts if you need<\/p>\n\n\n\n
WiFi Setting<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nUser can set up WiFi for the camera is connected Ethernet cable, or change to other available WiFi. Search the available WiFi, and choose the one you want to connect, then input the WiFi password (click the icon behind to confirm if the password is correct). Save then Test.<\/p>\n\n\n\n
SD\/TF Setting<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nOpen the Plan Record, it will record continuously to SD card, each record length can be set between 2-15 minutes. The video stream can be recorded at 1080p(720p), 480p and 240p.<\/p>\n\n\n\n <\/figure>\n\n\n\nUser can record video to SD card. Before recording, please kindly make sure you have inserted a SD card, and format it.<\/p>\n\n\n\n
Other Setting<\/strong><\/h4>\n\n\n\n1) OSD setting<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nOn the OSD setting, users can set up the Overlay name and Overlay time, so user can check name and time on the video screen. <\/p>\n\n\n\n
If Overlay name and Overlay time and Display temperature and humidity are checked at the same, the Device name will show Temperature and Humidity. <\/p>\n\n\n\n
Note: The temperature and humidity are unavailable on this model.<\/p>\n\n\n\n
2) Audio<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nUser can adjust the camera\u2019s microphone and speaker volume.<\/p>\n\n\n\n
3) AC Frequency<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nUser can adjust the power frequency, Power frequencies include: 50HZ(220V voltage selects 50HZ), 60HZ(110V voltage selects 60HZ), 60HZ used in Japan, Canada etc.<\/p>\n\n\n\n
4) Maintenance<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nUser can reboot and reset (restore) the camera. <\/p>\n\n\n\n
Tips: To reset the camera, the camera will restore to factory setting.<\/p>\n\n\n\n
Alarm Setting<\/strong><\/h3>\n\n\n\nIn the Alarm Setting, use can set up the Alarm alert.<\/p>\n\n\n\n <\/figure>\n\n\n\nMotion Detection<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nUser can set up motion detection area here to narrow the motion detected area to some important places, tick each window, move your mouse to the lower right corner and drag it can adjust the size of the window, and can move it to the needed area. <\/p>\n\n\n\n
User can choose the sensitivity from low, middle and high. The high sensitivity will be easy to get alarm. <\/p>\n\n\n\n
I\/O Detection and Temperature Detection are disabled in this model.<\/p>\n\n\n\n
Audio Detection<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nAlarm Action<\/strong><\/h4>\n\n\n\n <\/figure>\n\n\n\nIf user set up alarm, the camera will execute a variety of alarm actions at linkage: snap to email, snapshot and video to FTP, snap and video to SD card. <\/p>\n\n\n\n
And if you connect external I\/O alarm device, it can trigger alarm too. <\/p>\n\n\n\n
Tips: The mothod of\u201dTrigger Alone\u201d and \u201cCombination Trigger\u201d, if the user starts up an audio detection and motion detection, the \u201cCombination Trigger\u201d will be started up. Only when any abnormality is detected simultaneously by the audio detection and motion detection will the alarm action be triggered.<\/p>\n\n\n\n
1) Email setting<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nSender: your email address <\/p>\n\n\n\n
Smtp Server: such as smtp.gmail.com etc. <\/p>\n\n\n\n
Smtp port: 465 or 587 <\/p>\n\n\n\n
SSL: SSL <\/p>\n\n\n\n
User name:your email address, the same with sender <\/p>\n\n\n\n
Password: your email password, if you are using Gmail, please ge nerate an app password, and using the app password. Download a document from our website on how to set up app password. <\/p>\n\n\n\n
Receiver: any email address <\/p>\n\n\n\n
After all the information are filled in, click \u201cSave\u201d and \u201cTest\u201d the email to see if the email setting is successful or not.<\/p>\n\n\n\n
2) FTP Setting<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\nFTP Server Address: This field allows the user to designate an IP address or DDNS address for the FTP server. <\/p>\n\n\n\n
Server Port: This field allows the user to designate the port number for the FTP server. <\/p>\n\n\n\n
User Name: Input FTP user name. <\/p>\n\n\n\n
Password: Input FTP password. <\/p>\n\n\n\n
Path: Specify a folder for storing video and pictures, for example: .\/Q3 alarm <\/p>\n\n\n\n
Note: If you want to save the alarm picture and video to FTP, you must build an FTP sever, then create an FTP account with a password (not an anonymous account) on your FTP server and FTP account must have create and delete file rights.<\/p>\n\n\n\n