<\/td>Tap this icon to take a photo of the live view.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\nManually Adjust The Camera Monitoring Area<\/h3>\n\n\n\n 1. Tap this icon to open the operation panel.<\/p>\n\n\n\n
2. Press and hold the orange area , drag the orange dot to the direction you want to adjust, adjust to a suitable screen, and release your finger.<\/p>\n\n\n\n
3. Click this icon again to return to the live view.<\/p>\n\n\n\n <\/figure>\n\n\n\nTwo-way Audio<\/h3>\n\n\n\n Two-way audio allows you to talk and listen. Follow the steps below to enable it:<\/p>\n\n\n\n
1. Long press this icon and wait for the icon to turn blue Now you can talk with the camera.<\/p>\n\n\n\n
2. Release your finger to end the conversation.<\/p>\n\n\n\n <\/figure>\n\n\n\nVideo Quality<\/h3>\n\n\n\n In the tab, you can click ‘HD’, ‘SD’ or ‘smooth’ to select the video stream type according to your needs.<\/p>\n\n\n\n <\/figure>\n\n\n\nNote: <\/strong><\/p>\n\n\n\n1.SD: By default, the live video will stream in SD. <\/strong><\/p>\n\n\n\n2.HD: The highest-quality stream, clear stream has the highest quality of picture, but it also consume more bandwidth. <\/strong><\/p>\n\n\n\n3.Smooth: Lower quality streams consume less bandwidth.<\/strong><\/p>\n\n\n\nRecord Live Video\/Take Pictures<\/h3>\n\n\n\n Record live video<\/strong><\/p>\n\n\n\n1. Click this icon , when the icon turn into this indicating that it is recording, click again, the recording ends.<\/p>\n\n\n\n
2. The recording time is displayed on the screen, and the video is stored in your phone.<\/p>\n\n\n\n <\/figure>\n\n\n\nNote: You can view the recorded video and photo in the phone album or APP album.<\/strong><\/p>\n\n\n\nTake live photos<\/strong><\/h4>\n\n\n\n1. Tap this icon to take a live view photo. The photos are stored in your phone.<\/p>\n\n\n\n
2. You can view the recorded video in the phone album or APP album.<\/p>\n\n\n\n
Multi-person Sharing<\/h3>\n\n\n\n Each camera can be managed by several Femii app. The camera can be shared with up to 14 accounts for simultaneous viewing.<\/p>\n\n\n\n
1. After you setup the camera connected to your home Wi-Fi, go to setting page.<\/p>\n\n\n\n
2. Tap ‘setting’ > ‘Sub-account management’ > Enter the sharer’s account and save.<\/p>\n\n\n\n
3. The sub-account can use all the functions of the real-time video page.<\/p>\n\n\n\n
4. The sub-account can NOT change the settings.<\/p>\n\n\n\n <\/figure>\n\n\n\nPlayback<\/strong><\/h2>\n\n\n\nThis part will cover how to play back the videos recorded to your Micro SD card. Playback is only available when the SD card is inserted and recognized by the camera.<\/p>\n\n\n\n
How To View Video Playback<\/h3>\n\n\n\n 1. Tap Playback to enter the playback page.<\/p>\n\n\n\n
2. Scroll to select the start time of the video and click ‘OK’ to confirm.<\/p>\n\n\n\n <\/figure>\n\n\n\n3. Tap this icon y to enter the full-screen mode.<\/p>\n\n\n\n
4. Drag this icon to quickly select the start time of the video .<\/p>\n\n\n\n
5. Click this icon , when the icon turn into this , indicating that it is recording, click again, the recording ends. The recording time is displayed on the screen, and the video is stored in your phone.<\/p>\n\n\n\n
6. Click this icon ( ) to play, click again to pause.<\/p>\n\n\n\n
7. Tap this icon ( ) to take a live view photo. The photos are stored in your phone.<\/p>\n\n\n\n
8. When the SD card space is almost full, the oldest videos will be deleted automatically, freeing up some space to store new videos.<\/p>\n\n\n\n
Set Recording Video Quality<\/h3>\n\n\n\n You can set the quality of the recorded video in the APP. Please follow the steps below Steps: Go to ‘Settings’ > ‘Video storage’ > Choose the picture quality you need.<\/p>\n\n\n\n <\/figure>\n\n\n\nNote: You can set the recording video quality and real-time image quality separately, they are dierent functions. HD quality occupies the highest memory, Smooth occupies the lowest memory.<\/p>\n\n\n\n
Alarm Setting<\/strong><\/h2>\n\n\n\nWhen the system detects a movement change, it will trigger an alarm and prompt the camera to take the following actions: sound an alarm, push a notification to your smartphone, and record the movement to your Micro SD card.<\/p>\n\n\n\n
How To Turn On The Alarm<\/h2>\n\n\n\n Steps: Go to ‘Settings’ > ‘Alarm’<\/p>\n\n\n\n
To enable the alarm, tap the icon , change it to . To disable it, tap the icon again.<\/p>\n\n\n\n <\/figure>\n\n\n\nDisable\/Enable Push Notification<\/h3>\n\n\n\n Receive alarm information on your smartphone, please open ‘Allow notifications’ on the APP. There are two ways to open: Way 1: Go to ‘Settings’ > ‘Notifications’ on your smartphone, and then click Femii App to allow notifications. Way 2: Click ‘setting’ on the camera management page and follow the icon.<\/p>\n\n\n\n
Motion Alarm<\/h3>\n\n\n\n Steps: Go to ‘Settings’ > ‘Alarm’ >turn on ‘Alarm’ >turn on ‘Alarm Siren’ > Setting ‘Opening time’. Set the alarm time according to your needs. During the opening time, if movement is detected, the camera will sound an alarm.<\/p>\n\n\n\n <\/figure>\n\n\n\nFlood Light<\/h3>\n\n\n\n The flood light function has two modes: ‘ Flood Light’ and ‘ Turn on Flood light with alarm’. Set an alarm schedule and turn on Flood light with alarm. During this period, when movement is detected, the flood light will automatically turn on, and the monitoring screen will automatically switch from infrared night vision to full-color screen. Steps: Go to ‘Settings’ > ‘Flood Light’ >turn on ‘ Flood Light ‘ or ‘Turn on Flood light with alarm’.<\/p>\n\n\n\n
Camera Alarm Area Setting<\/h3>\n\n\n\n Set up key monitoring areas, such as windows, swimming pools, gates, etc. When someone enters the areas, the alarm will sound, and the APP will push notifications to your smartphone. The camera will record movement on your micro SD card. If people or animals enter the non-monitoring areas, the alarm will not sound. Steps: Go to ‘Settings’ > ‘Alarm’ > ‘Camera alarm area’ >Drag the red frame to adjust the alarm area> Save Settings.<\/p>\n\n\n\n <\/figure>\n\n\n\n <\/figure>\n\n\n\nMotion Sensitivity<\/h3>\n\n\n\n The camera has 3 types motion sensitivity<\/p>\n\n\n\nSensitivity<\/td> Detecting Distance (for moving and living things)<\/td> Detecting Distance (for moving vehicles)<\/td><\/tr> Low<\/td> Up to 4 meters (13ft)<\/td> Up to 10 meters (33ft)<\/td><\/tr> Mid<\/td> Up to 6 meters (20ft)<\/td> Up to 12 meters (40ft)<\/td><\/tr> High<\/td> Up to 9 meters (30ft)<\/td> Up to 15 meters (50ft)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\nNote: Higher sensitivity offers longer detecting distance, but it would lead to more false alarms. We advise setting the sensitivity level to ‘low’ or ‘Default’!<\/p>\n\n\n\n
Moblie Tracking<\/h3>\n\n\n\n After the camera is successfully added, adjust the camera to a fixed monitoring position on the APP real-time monitor. Turn on mobile tracking, and the camera will track and rotate with the moving objects. When the moving object leaves the screen, the camera will return to the position you set. lf the camera does not set the monitoring position, the camera will return to the default position. Steps: Go to ‘Settings’ > ‘Alarm’ > ‘Mobile Tracking’ > Turn on<\/p>\n\n\n\n
Video Lock<\/strong><\/h2>\n\n\n\nThis chapter will cover how to set video lock in APP. When you turn on the camera, you need to enter a gesture to open it to better protect your privacy. Step: Go to ‘Settings’ > ‘Video lock’ > ‘Create video lock’ > Draw gesture > Draw gesture again > Click ‘OK’ to save.<\/p>\n\n\n\n
After the setting is completed, a lock symbol will appear on the camera management page.<\/p>\n\n\n\n <\/figure>\n\n\n\n <\/figure>\n\n\n\nSD Card<\/strong><\/h2>\n\n\n\nLocal Storage<\/h3>\n\n\n\n Femii cameras support SD card storage (default 24\/7 recording). If you don’t need it, you can choose to turn off this feature. There are three emotional modes for the resolution of locally stored videos: smooth\/ SD 1 HD, smooth is the most space-saving, and HD is the clearest.<\/p>\n\n\n\n
SD Card Statue In Setting<\/h3>\n\n\n\n 1. It shows “Not inserted” if the SD card is not inserted or can’t be detected.<\/p>\n\n\n\n
2. It shows the memory statue if the SD card is available to recorder,<\/p>\n\n\n\n
If you want to clear the recording content in the SD card, click ‘Format SD card.<\/p>\n\n\n\n
About Micro SD Card<\/h3>\n\n\n\n 1. Functions and requirements <\/strong>(1) The camera can work without installing micro SD card, but it cannot record. Only when the micro SD card is inserted into the camera will it record automatically, without manual operation. After ten minutes, you can click playback to view video. (2) When the SD card space is almost full, the oldest videos will be deleted automatically, freeing up some space to store new videos, no need to replace the micro SD card. (3) The card’s reading and writing speed must be higher than c6+. If the speed is lower than this, the camera will not be able to record or slow down.<\/p>\n\n\n\n2. The camera cannot recognize micro SD card <\/strong>(1) 8G, 16G and 32G micro SD cards, the format must be FAT32. (2) 64G and 128G micro SD cards, the format must be exFAT format. (3) lf the card cannot be recognized, please format it on the computer and confirm whether the format of the micro SD card is correct, (4) If the memory card is still not recognized, you can restart the camera after inserting the memory card.<\/p>\n\n\n\nSpecification<\/strong><\/h2>\n\n\n\nProduct Name<\/td> Femii Triton<\/td><\/tr> Model<\/td> B6<\/td><\/tr> APP<\/td> Femii <\/td><\/tr> Power<\/td> 5V\/1A<\/td><\/tr> Power Cable Length<\/td> 3m<\/td><\/tr> WiFi Frequency Bands<\/td> Support 802.11b\/g\/n 2.4 GHz<\/td><\/tr> Resolution<\/td> 2304*1296<\/td><\/tr> Field of View<\/td> 105 diagonal<\/td><\/tr> Picture Sensor<\/td> 1\/3CMOS<\/td><\/tr> Infrared Sensor<\/td> Support<\/td><\/tr> Storage<\/td> Maximum support 128G <\/td><\/tr> Operating Temperature<\/td> 14’F- 131’F (-10’C -55’C)<\/td><\/tr> Compatibility<\/td> iOS & Android System<\/td><\/tr> Power Consumption<\/td> 6W (Maximum)<\/td><\/tr> Weather Resistance<\/td> IP66<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\nMaintenance And Cleaning<\/strong><\/h2>\n\n\n\nPlease use a slightly damp soft towel to clean the camera and lens. Do not use corrosive solutions to wipe the body, otherwise it may cause product failure, cracking or discoloration.<\/p>\n","protected":false},"excerpt":{"rendered":"
Notice Before Using Femii Camera NOTICE Before Starting Using Femii Triton! When start to add the camera to the Wi-Fi network, please make sure it\u2019s under a full Wi-Fi signal. (You can test with your smartphone) Make sure connect the device to your smartphone (successfully monitored on app) before installing on the wall. This camera […]<\/p>\n","protected":false},"author":2,"featured_media":6662,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","_uag_custom_page_level_css":"","_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[711],"tags":[],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1","uagb_featured_image_src":{"full":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1",600,315,false],"thumbnail":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=150%2C150&ssl=1",150,150,true],"medium":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=300%2C158&ssl=1",300,158,true],"medium_large":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1",600,315,true],"large":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1",600,315,true],"1536x1536":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1",600,315,true],"2048x2048":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1",600,315,true],"lshowcase-thumb":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=200%2C105&ssl=1",200,105,true],"woocommerce_thumbnail":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=300%2C300&ssl=1",300,300,true],"woocommerce_single":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?fit=600%2C315&ssl=1",600,315,true],"woocommerce_gallery_thumbnail":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=100%2C100&ssl=1",100,100,true],"jnews-360x180":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=360%2C180&ssl=1",360,180,true],"jnews-750x375":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=600%2C315&ssl=1",600,315,true],"jnews-1140x570":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=600%2C315&ssl=1",600,315,true],"jnews-120x86":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=120%2C86&ssl=1",120,86,true],"jnews-350x250":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=350%2C250&ssl=1",350,250,true],"jnews-750x536":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=600%2C315&ssl=1",600,315,true],"jnews-1140x815":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=600%2C315&ssl=1",600,315,true],"jnews-360x504":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=360%2C315&ssl=1",360,315,true],"jnews-75x75":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=75%2C75&ssl=1",75,75,true],"jnews-350x350":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=350%2C315&ssl=1",350,315,true],"jnews-featured-750":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=600%2C315&ssl=1",600,315,true],"jnews-featured-1140":["https:\/\/i0.wp.com\/www.camapp365.com\/wp-content\/uploads\/2022\/04\/Femii.jpg?resize=600%2C315&ssl=1",600,315,true]},"uagb_author_info":{"display_name":"Security Manual","author_link":"https:\/\/www.camapp365.com\/author\/security-manual"},"uagb_comment_info":19,"uagb_excerpt":"Notice Before Using Femii Camera NOTICE Before Starting Using Femii Triton! When start to add the camera to the Wi-Fi network, please make sure it\u2019s under a full Wi-Fi signal. (You can test with your smartphone) Make sure connect the device to your smartphone (successfully monitored on app) before installing on the wall. This camera…","_links":{"self":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts\/5599"}],"collection":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/comments?post=5599"}],"version-history":[{"count":1,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts\/5599\/revisions"}],"predecessor-version":[{"id":6663,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts\/5599\/revisions\/6663"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/media\/6662"}],"wp:attachment":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/media?parent=5599"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/categories?post=5599"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/tags?post=5599"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}