{"id":5722,"date":"2022-05-08T12:50:47","date_gmt":"2022-05-08T12:50:47","guid":{"rendered":"https:\/\/www.camapp365.com\/?p=5722"},"modified":"2023-02-16T08:31:57","modified_gmt":"2023-02-16T08:31:57","slug":"how-to-set-zumimall-doorbell-cameracomplete-guide","status":"publish","type":"post","link":"https:\/\/www.camapp365.com\/zumimall\/how-to-set-zumimall-doorbell-cameracomplete-guide","title":{"rendered":"How to SetUp ZUMIMALL Doorbell(Complete Manual)"},"content":{"rendered":"\n

ZUMIMALL doorbell can provide you real-time clear two-way audio with built-in microphone and speaker. Select a pre-recorded 30 seconds voice message for quick replies when you\u2019re not available to talk or in a hurry.<\/p>\n\n\n\n

ZUMIMALL and CloudEdge<\/a> are the same functions and settings, we recommend to check the CloudEdge user guide<\/a><\/p>\n\n\n\n\n\n

ZUMIMALL Doorbell Information<\/strong><\/h2>\n\n\n\n

Brands: ZUMIMALL
APP: ZUMIMALL<\/a>
Model: Bell J7 \uff0cB07X134Z5Y, View on Amazon<\/a><\/p>\n\n\n\n

What\u2019s in the Box<\/strong><\/h2>\n\n\n\n
\"What\u2019s<\/figure>\n\n\n\n

ZUMIMALL Doorbell * 1 <\/p>\n\n\n\n

DingDong *1 <\/p>\n\n\n\n

Quick User Guide *1 <\/p>\n\n\n\n

USB Cable *1 <\/p>\n\n\n\n

Screws Set\/Screwdriver *1 <\/p>\n\n\n\n

3M Tape *2 <\/p>\n\n\n\n

NOTE: <\/strong>Micro SD card and power adapter are not included.<\/p>\n\n\n\n

ZUMIMALL Doorbell Key Description<\/strong><\/h2>\n\n\n\n
\"ZUMIMALL<\/figure>\n\n\n\n
\"ZUMIMALL<\/figure>\n\n\n\n

1. Doorbell comes with a 4,500mAh rechargeable Li-ion battery.<\/p>\n\n\n\n

ZUMIMALL Doorbell<\/strong> LED Status Indicators<\/strong><\/h2>\n\n\n\n
LED STATUS<\/strong><\/td>INDICATION<\/strong><\/td><\/tr>
Solid red<\/td>Device is abnormal.<\/td><\/tr>
Flash red (once\/sec)<\/td>Ready for Wi-Fi confifiguration.<\/td><\/tr>
Flash red (twice\/sec)<\/td>Connecting to Wi-Fi<\/td><\/tr>
Solid blue<\/td>Device is online<\/td><\/tr>
Flash blue (once\/sec)<\/td>LiVe-viewing doorbell cam<\/td><\/tr>
Flash blue (twice\/sec)<\/td>Firmware upgrading<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Chime Key Description<\/strong><\/h2>\n\n\n\n
\"Chime<\/figure>\n\n\n\n
\"Chime<\/figure>\n\n\n\n

2. Please mind the battery polarities while installing the batteries.<\/p>\n\n\n\n

Download and Install ZUMIMALL<\/strong><\/strong> App<\/strong><\/h2>\n\n\n\n

Download ZUMIMALL App from Google Play or App Store. Or scan the QR codes as below, with your smart phone.<\/p>\n\n\n\n

NOTE: <\/strong>Google Play is a trademark of Google Inc. App Store is a service mark of Apple Inc.<\/p>\n\n\n\n

\"Download<\/figure>\n\n\n\n

NOTE: <\/strong>Please turn on both of the following permissions.<\/p>\n\n\n\n

\u2460 Allow ZUMIMALL App to access mobile cellular data and wireless LAN, otherwise it will fail to connect the camera. <\/p>\n\n\n\n

\u2461 Allow ZUMIMALL App to receive pushed messages, otherwise, the phone will not receive alarms when motion is detected.<\/p>\n\n\n\n

\"Download<\/figure>\n\n\n\n

Register ZUMIMALL account<\/h2>\n\n\n\n

New user needs to sign up ZUMIMALL App with email address. Click ‘Sign up’ to create a New Account and follow the steps to complete registration.<\/p>\n\n\n\n

\"Register<\/figure>\n\n\n\n

How to Add ZUMIMALL Doorbell camera to APP<\/strong><\/h2>\n\n\n\n

Preparations for connection<\/h3>\n\n\n\n

\u2460 Insert a Micro SD Card into the camera to save video clips or you can start the 7-day free cloud service. Without Micro SD Card or cloud service, no video will be saved. <\/p>\n\n\n\n

\u2461 The camera only works with 2.4GHz Wi-Fi, not support 5GHz. <\/p>\n\n\n\n

\u2462 When connecting to the network, please take the camera close to the router (Recommended within 10-15ft).<\/p>\n\n\n\n

Turn on the ZUMIMALL doorbell power switch<\/h3>\n\n\n\n

Switch on power for your doorbell, and you will see the LED indicator flashes red (once per second). Start setting up your doorbell following the in-app instructions.<\/p>\n\n\n\n

\"Set<\/figure>\n\n\n\n

Connect ZUMIMALL Doorbell Camera to App<\/h3>\n\n\n\n
    \n
  1. Tap ‘Add Device’<\/li>\n\n\n\n
  2. Select ‘Doorbell Camera’<\/li>\n\n\n\n
  3. Turn on the Camera<\/li>\n<\/ol>\n\n\n\n
    \"Connect<\/figure>\n\n\n\n

    4. Reset the Camera<\/p>\n\n\n\n

    5. Input Wi-Fi Password<\/p>\n\n\n\n

    6. Prepare the Scanning<\/p>\n\n\n\n

    \"Connect<\/figure>\n\n\n\n

    7. Scan QR Code when Indicator Flashing Slowly in Red<\/p>\n\n\n\n

    8. Finished Installation When Reaches 100%<\/p>\n\n\n\n

    \"Connect<\/figure>\n\n\n\n

    9. Perform Network Diagnosis<\/p>\n\n\n\n

    10. View Installation Tips<\/p>\n\n\n\n

    \"Connect<\/figure>\n\n\n\n

    Charge your ZUMIMALL doorbell<\/strong><\/h2>\n\n\n\n

    Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.<\/p>\n\n\n\n

    LED STATUS<\/strong><\/td>INDICATION<\/strong><\/td><\/tr>
    Solid red<\/td>Battery charging<\/td><\/tr>
    Solid blue<\/td>Fully charged<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Compatible charger (not provided):<\/h3>\n\n\n\n

    USB compatible mobile phone charger (DC 5V 1A~2A).<\/p>\n\n\n\n

    \"Compatible<\/figure>\n\n\n\n

    Pair With Your Indoor Chime<\/strong><\/h2>\n\n\n\n

    1. Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.<\/p>\n\n\n\n

    \"Pair<\/figure>\n\n\n\n

    2. Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing. Chime pairing succeeds.<\/p>\n\n\n\n

    \"Pair<\/figure>\n\n\n\n

    Chime settings.<\/h3>\n\n\n\n

    Ringtone selection.<\/strong><\/p>\n\n\n\n

    Click to change ringtone (4 ringtones available).<\/p>\n\n\n\n

    Volume control button.<\/strong><\/p>\n\n\n\n

    Click to control volume: level 1: 110 dB; level 2: 100 dB level 3: 90 dB; level 4: 80 dB<\/p>\n\n\n\n

    Settings.<\/strong><\/p>\n\n\n\n

    Click to enter\/quit pairing mode; <\/p>\n\n\n\n

    Press & hold for 5 seconds to restore factory defaults.<\/p>\n\n\n\n

    \"Chime<\/figure>\n\n\n\n

    How To Install Your ZUMIMALL Doorbell<\/h2>\n\n\n\n

    1. Select location for your doorbell.<\/p>\n\n\n\n

    It is suggested to mount the doorbell at least 4 feet (120 cm) above the ground for optimal angle of view and best motion detection performance.<\/p>\n\n\n\n

    \"How<\/figure>\n\n\n\n

    2. (OPTIONAL) Install at an angle.<\/p>\n\n\n\n

    You can purchase the following angled brackets so as to point your doorbell to a specific view angle.<\/p>\n\n\n\n

    \"How<\/figure>\n\n\n\n

    3. Standard installation.<\/p>\n\n\n\n

    \"How<\/figure>\n\n\n\n
    \"How<\/figure>\n\n\n\n

    Anti-theft Tamper Alarm.<\/strong><\/h2>\n\n\n\n

    You can also enable the anti-theft alarm in doorbell settings.<\/p>\n\n\n\n

    \"Anti-theft<\/figure>\n\n\n\n

    Tamper Alarm On<\/h3>\n\n\n\n

    With tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner\u2019s APP account.<\/p>\n\n\n\n

    Tamper Alarm Off<\/h3>\n\n\n\n

    You can disable the tamper alarm in doorbell settings, and detach the doorbell without any alarm for battery recharge or regular maintenance.<\/p>\n\n\n\n

    Product Specifications<\/strong><\/h2>\n\n\n\n

    Bell J7 ZUMIMALL Doorbell Specifications<\/h3>\n\n\n\n
    Camera<\/td>2.0MP Full-HD Camera<\/td><\/tr>
    Effective pixels<\/td>1920(H) x1080 (V)<\/td><\/tr>
    IR LED<\/td>High power dot-array IR LED xI<\/td><\/tr>
    View angle<\/td>145\u00b0<\/td><\/tr>
    Motion detect range<\/td>100\u00b0 (Max 5m)<\/td><\/tr>
    Motion sensitivity<\/td>5 level sensitivity settable<\/td><\/tr>
    Alarm trigger<\/td>Call button, motion detect, anti-theft alarm<\/td><\/tr>
    Wi-Fi<\/td>2.4 ~ 2.4835 GHZ WIFI (IEEE802.llb\/g\/n)<\/td><\/tr>
    Video recording<\/td>Video clips against events<\/td><\/tr>
    Audio<\/td>Full duplex 2-way audio<\/td><\/tr>
    Storage<\/td>SD card (Max. 128G)<\/td><\/tr>
    Cloud storage<\/td>Yes (7-days-free trial)<\/td><\/tr>
    Power supply<\/td>Built-in rechargeable Li-ion battery<\/td><\/tr>
    Battery capacity<\/td>4,500mAh<\/td><\/tr>
    Ingress protection<\/td>IP65<\/td><\/tr>
    Operating Temp.<\/td>-10 C to 50 C<\/td><\/tr>
    Dimensions<\/td>34.5 x56 x134.6mm<\/td><\/tr>
    Net weight<\/td>125.8g (Battery Included)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    ZUMIMALL Chime Specifications<\/h3>\n\n\n\n
    Power source 1<\/td>DC 5V IA (from Micro USB)<\/td><\/tr>
    Power source 2<\/td>AA LR6 1.5V battery \u00d7 3 units<\/td><\/tr>
    Consumption<\/td>0.4W<\/td><\/tr>
    Ringtones<\/td>4 ringtones optional<\/td><\/tr>
    Connection type<\/td>Radio frequency 433MHz<\/td><\/tr>
    Place of use<\/td>Indoor<\/td><\/tr>
    Blue LED flashing<\/td>Pairing mode<\/td><\/tr>
    Red LED flashing<\/td>Working normally<\/td><\/tr>
    Blue LED flashing twice<\/td>Reset factory default succeeds<\/td><\/tr>
    Working Temp.<\/td>-10 C ~ 50 C<\/td><\/tr>
    Humidity<\/td><90% no condensation<\/td><\/tr>
    Dimension<\/td>755\u00d775\u00d728mm<\/td><\/tr>
    Weight<\/td>70g (Exclude batteries)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    FAQ<\/h2>\n\n\n\n
    \n
    ZUMIMALL Doorbell Frequently Asked Questions<\/a><\/blockquote>