<\/figure>\n\n\n\nAddition of AP hotspot<\/h3>\n\n\n\n Connect the camera own wireless network to pair WI-FI.<\/p>\n\n\n\n
1. <\/strong>Select Addition of AP hotspot<\/strong>, connect the camera to the power source, and wait for the camera to boot up, when the camera issues a voice prompt, click Next.<\/p>\n\n\n\n(If the camera does not support voice intercom, please check the indicator)<\/p>\n\n\n\n<\/audio>Voice prompt: please configure camera by AP hotspot or scanning code<\/figcaption><\/figure>\n\n\n\n <\/figure>\n\n\n\n2. <\/strong>Click Go to Setting<\/strong>, connect your phone to the ‘CLOUDCAM_XXX<\/strong>‘ wifi, then go back to YCC365 PLUS and click Next.<\/p>\n\n\n\n <\/figure>\n\n\n\n3. <\/strong>Select your wifi and enter your wifi password, then click Confirm<\/p>\n\n\n\n <\/figure>\n\n\n\n4. <\/strong>Wait for the camera to connect to the wifi, about 1-2 two minutes. After successful connection, set a name and you can start using it.<\/p>\n\n\n\n<\/audio>Voice prompt: Connect the camera<\/figcaption><\/figure>\n\n\n\n <\/figure>\n\n\n\nAddition of Network cable<\/h3>\n\n\n\n Only applicable for the device with the network cable socket<\/p>\n\n\n\n
1. <\/strong>Connect the camera to the router with a network cable and connect it to the power supply, then wait for the camera to boot up and when it beeps, click Next.<\/p>\n\n\n\n <\/figure>\n\n\n\n2. <\/strong>Scan the QR code on the camera, which is usually on the bottom of the camera. The camera will be added after scanning.<\/p>\n\n\n\n <\/figure>\n\n\n\nLocal connection to YCC365 PLUS<\/strong> Camera<\/strong><\/h2>\n\n\n\nLocal connection You can use the YCC365 PLUS camera without internet connection.<\/p>\n\n\n\n
1.<\/strong> In the Login or Mine screen, click Local direct connection.<\/p>\n\n\n\n <\/figure>\n\n\n\n2. <\/strong>Click ‘+’, select your camera, click Next.<\/p>\n\n\n\n <\/figure>\n\n\n\n3. <\/strong>Click Go To Setting, connect to CLOUDCAM_XXXX wifi, then return to YCC365 PLUS APP.<\/p>\n\n\n\n <\/figure>\n\n\n\n4. <\/strong>Enter the username and password of the camera to complete the connection.Default username: <\/strong>admin , password:<\/strong> 12345<\/p>\n\n\n\n <\/figure>\n\n\n\nCamera Function Setting<\/strong><\/h2>\n\n\n\nShare YCC365 Plus camera<\/h3>\n\n\n\n You can share the camera to your family or friends.<\/p>\n\n\n\n
1. <\/strong>Click the camera to enter the video screen, then select Share<\/strong><\/p>\n\n\n\n <\/figure>\n\n\n\n2.<\/strong> Click ‘Add family member<\/strong>‘, then set a name and enter your family or friend’s YCC365 account to share.<\/p>\n\n\n\n <\/figure>\n\n\n\nRecording Settings<\/h3>\n\n\n\n The camera needs a memory card to record video, please insert the memory card first. Insert the memory card when the camera is off, otherwise the camera may not recognize the memory card.<\/p>\n\n\n\n
1. <\/strong>Click the Settings<\/strong> icon > Memory card management<\/strong> The camera recognizes the memory card will show the setting options, the default is Alarm recording, the camera will record only when motion is detected.<\/p>\n\n\n\n <\/figure>\n\n\n\n2. <\/strong>Click Recording mode<\/strong> to select the recording mode. Select Continuous recording<\/strong>, the camera will be 24 hours continuous recording.<\/p>\n\n\n\n <\/figure>\n\n\n\nView Camera Recording<\/h3>\n\n\n\n Click Playback<\/strong> and select Card playback<\/strong>. You can then view the video saved on the memory card. The blue time indicates that there is video at the current time.<\/p>\n\n\n\n <\/figure>\n\n\n\nMobile tracking settings<\/h3>\n\n\n\n Open Intelligent tracking, the camera will follow the movement of the object.<\/p>\n\n\n\n <\/figure>\n\n\n\nPTZ Settings<\/h3>\n\n\n\n You can save the camera’s moving position, so that the camera can quickly move to the specified location.<\/p>\n\n\n\n
Click Save to save the current location, then enter the Presets page, you can see the saved location, click the picture The camera will automatically move to the specified location.<\/p>\n\n\n\n <\/figure>\n\n\n\n