{"id":666,"date":"2021-11-03T08:30:21","date_gmt":"2021-11-03T08:30:21","guid":{"rendered":"https:\/\/cameramanual.org\/?p=666"},"modified":"2023-02-07T14:59:45","modified_gmt":"2023-02-07T14:59:45","slug":"set-up-danale-nvr-security-camera-system","status":"publish","type":"post","link":"https:\/\/www.camapp365.com\/danale\/nvr-security-camera-system-user-manual","title":{"rendered":"How To SetUp Danale NVR Security camera system? (Ultimate Manual Guide)"},"content":{"rendered":"\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>Declaration<\/strong><\/h2>\n\n\n\n<ul>\n<li>The quick Operation guide can be matched only for our company\u2019s device.<br><\/li>\n\n\n\n<li>The guide is only used for quick operation, please refer to user manual for detail operation steps.<br><\/li>\n\n\n\n<li>All copy rights reserved to our company, please contact to our technical staffs if have any problem.<br><\/li>\n\n\n\n<li>For the latest version, please contact to our sales assistants.<\/li>\n<\/ul>\n\n\n\n<p><strong>Below is the correct using method, danger prevention, property loss prevention, please do obey the rules.<\/strong><\/p>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>Installation Environment<\/strong><\/h2>\n\n\n\n<ul>\n<li>Please use the device in the temperature rank from 0\u2103-40\u2103;<br><\/li>\n\n\n\n<li>Do not put device in wet or dusty environment;<br><\/li>\n\n\n\n<li>Do not put device under direct sunlight or near heat- producing equipment;<br><\/li>\n\n\n\n<li>Keep device installed horizontally;<br><\/li>\n\n\n\n<li>Install in stable place to prevent falling down;<br><\/li>\n\n\n\n<li>Install in ventilated place, do not blocking ventilation opening on the device;<br><\/li>\n\n\n\n<li>Do not put other goods on products;<br><\/li>\n\n\n\n<li>Can be only used in reference range of input and output voltage;<br><\/li>\n\n\n\n<li>Do not dismount the device casually;<br><\/li>\n\n\n\n<li>Attention for thunder prevention when connecting to various kinds of communication wires and cables. Strictly prohibit outdoor LAN cable connect to NVR directly;<br><\/li>\n\n\n\n<li>Please select professional security hard disk to ensure long time work, large data volumes. Too ensure the quality of HDD, please purchase from official retailers.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>Safety Warning of Lithium Battery<\/strong><\/h2>\n\n\n\n<p>This device used CR2032 lithium battery, explosion may happen if using other type batteries. When changing battery, do not put used battery into fire burning household garbage, please obey the local raw and rule.<\/p>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>Interface definition of back panel<\/strong><\/h2>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Interface-definition-of-back-panel.png?ssl=1\" alt=\"\" class=\"wp-image-669\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<figure class=\"wp-block-table aligncenter\"><table class=\"has-fixed-layout\"><tbody><tr><td class=\"has-text-align-center\" data-align=\"center\">Name<\/td><td class=\"has-text-align-center\" data-align=\"center\">Icon<\/td><td>Function&nbsp;Description<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">DC&nbsp;INPUT<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-676\" style=\"width: 200px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Icon-10.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>DC&nbsp;48V&nbsp;Power&nbsp;Supply&nbsp;Port<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">1.2.3.4.5.6.7.8<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-677\" style=\"width: 200px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon3.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>Port1&nbsp;&#8211;&nbsp;port&nbsp;8&nbsp;are&nbsp;POE&nbsp;network&nbsp;cable&nbsp;ports,&nbsp;10M&nbsp;&amp;100M;&nbsp;Support&nbsp;connect&nbsp;to&nbsp;PoE&nbsp;IPC;&nbsp;8&nbsp;ports&nbsp;are&nbsp;interconnected&nbsp;and&nbsp;isolated&nbsp;with&nbsp;LAN&nbsp;port;&nbsp;Port&nbsp;number&nbsp;is&nbsp;matched&nbsp;with&nbsp;channel&nbsp;number;Max.&nbsp;power&nbsp;consumption&nbsp;for&nbsp;each&nbsp;port&nbsp;is&nbsp;30W<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">LAN<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-671\" style=\"width: 150px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Icon-5.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>LAN&nbsp;network&nbsp;cable&nbsp;port,&nbsp;10M&nbsp;&amp;100M;&nbsp;Isolated&nbsp;with&nbsp;port&nbsp;1&nbsp;&#8211;&nbsp;port8;&nbsp;Support&nbsp;showing&nbsp;picture&nbsp;after&nbsp;searching&nbsp;out&nbsp;device&nbsp;and&nbsp;adding<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">USB<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-672\" style=\"width: 104px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Icon-6.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>USB2.0&nbsp;port,&nbsp;connect&nbsp;to&nbsp;mouse,&nbsp;USB&nbsp;key&nbsp;for&nbsp;storage,&nbsp;mobile&nbsp;HDD;&nbsp;Support&nbsp;2&nbsp;USB,&nbsp;highly&nbsp;suggested&nbsp;one&nbsp;for&nbsp;operation&nbsp;and&nbsp;the&nbsp;other&nbsp;for&nbsp;upgrading&nbsp;&amp;&nbsp;backup<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">A-OUT<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-673\" style=\"width: 70px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Icon-7.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>Audio&nbsp;put&nbsp;port,&nbsp;transmit&nbsp;simulative&nbsp;audio&nbsp;signal&nbsp;to&nbsp;sound&nbsp;equipment&nbsp;&amp;&nbsp;earphone<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">HD-OUT<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-674\" style=\"width: 85px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Icon-8.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>HDMI&nbsp;port,&nbsp;high&nbsp;definition&nbsp;video&nbsp;&amp;&nbsp;audio&nbsp;signal&nbsp;output&nbsp;port,&nbsp;transmit&nbsp;uncompressed&nbsp;high&nbsp;definition&nbsp;video&nbsp;and&nbsp;muti-channel&nbsp;video&nbsp;data&nbsp;to&nbsp;displayer&nbsp;capable&nbsp;with&nbsp;HDMI&nbsp;port<\/td><\/tr><tr><td class=\"has-text-align-center\" data-align=\"center\">VGA<\/td><td class=\"has-text-align-center\" data-align=\"center\"><img decoding=\"async\" class=\"wp-image-675\" style=\"width: 134px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Icon-9.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><\/td><td>VGA&nbsp;port,&nbsp;video&nbsp;output&nbsp;port,&nbsp;transmit&nbsp;simulative&nbsp;video&nbsp;signal,&nbsp;can&nbsp;connect&nbsp;to&nbsp;monitor&nbsp;to&nbsp;see&nbsp;the&nbsp;signal&nbsp;output<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>Function Operation<\/strong><\/h2>\n\n\n\n<ul>\n<li>Below operation step is based with 8ch device, users can take it for reference when using different channel devices. Snapshots in the file are only for reference, please comply with the actual instruments.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Resolution<\/h3>\n\n\n\n<p>Connect to power supply, PoE NVR turns on. After initiating, interface will shows \u201cGuide\u201d, output system resolution<br>\u201c<img decoding=\"async\" class=\"wp-image-678\" style=\"width: 141px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Resolution-5.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> \u201d,choose \u201cQuit\u201dmeans not change resolution; Click \u201cStart\u201d means comet to \u201cPhone\u201dinterface; please select suitable resolution, and then click \u201cStart\u201d, it will work after system restarted.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Resolution-6.png?ssl=1\" alt=\"\" class=\"wp-image-679\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Phone Monitoring<\/h3>\n\n\n\n<p>In this interface, choose \u201cNext \u201d means: System will operate \u201cNetwork Setting\u201d &#8211; \u201dNet Channel\u201d &#8211; \u201dDisk Management\u201d &#8211; \u201cRecord Setting\u201dstep by step. To ensure quick recording, users can modify specifications based on requirements.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Phone-Monitoring.png?ssl=1\" alt=\"\" class=\"wp-image-680\" data-recalc-dims=\"1\"\/><figcaption class=\"wp-element-caption\">Step 1: Android &amp; iOS mobile should download Danale app firstly, apply an account for personal &amp; corporate usage. Official download address: <a href=\"https:\/\/cameramanual.org\/danale\" target=\"_blank\" rel=\"noopener\"><meta charset=\"utf-8\">https:\/\/cameramanual.org\/danale<\/a>\uff1b <br><br>Step 2: Make sure NVR connected to WAN, turn on P2P function, click and refresh until the device is online. Step 3: Turn app in mobile, input correct user name and password, then log in; Step 4: Click \u201c+\u201d to add device, users can input device ID manually or scan the QR code until device added successfully. Step 5: Double click device can view device and set related data. For detailed operation, users can view operation guide in app. <br>Click \u201cNext\u201d for Network setting.<\/figcaption><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Network Setting<\/h3>\n\n\n\n<p>Please modify NVR IP address based with IPC address. <\/p>\n\n\n\n<p>DHCP func tion means assign dynami c IP address automatically in LAN, IP address changes in real time, it is not suggested.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Network-Setting.png?ssl=1\" alt=\"\" class=\"wp-image-681\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>Click \u201cNext\u201d for Camera Management.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Camera Management<\/strong><\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Camera-Management.png?ssl=1\" alt=\"\" class=\"wp-image-682\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p><strong>Auto Add function is for default setting:<\/strong> PoE NVR will add camera to each channel automatically. In this situation,users can not add camera manually until choose \u201cManual Add\u201d. <\/p>\n\n\n\n<p><strong>Click \u201cAdd\u201d, come to camera search interface: <\/strong>Different segment device can be search out under private protocol, in Onvif protocol, only the same segment device can be searched out.<\/p>\n\n\n\n<p><strong>Add All:<\/strong> Add all device which being searched out to channel, the channel add type need change to \u201cmanual\u201d.<\/p>\n\n\n\n<p><br><strong>Manual Add:<\/strong> When IP address can not be searched out or knowing the device IP, users can use Manual Add function. If users need to connect PoE NVR with device powered by local wired power supply in LAN, do not set the device IP address in :172.26.78.X (do not similar to device IP which powered by PoE).<\/p>\n\n\n\n<p><strong>Click \u201c <\/strong><img decoding=\"async\" class=\"wp-image-683\" style=\"width: 33px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"><strong>\u201d to remove device Select: <\/strong>target device in list,click delete button, then device will be deleted.<\/p>\n\n\n\n<p><br><strong>Remove All: <\/strong>Click Remove All, all device in list will be removed. Click \u201cNext\u201d for Disk management.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Disk Management<\/strong><\/h3>\n\n\n\n<p>After HDD installed in NVR, users can check the HDD numbers, working status, total space, free space and hard disk format. As picture below.<\/p>\n\n\n\n<p><strong>All newly installed HDD should be formatted before starting work.<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Disk-Management.png?ssl=1\" alt=\"\" class=\"wp-image-684\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>Click \u201cNext\u201dfor Record setting (period, motion detection, alarm setting).<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Record Setting<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Record-Setting.png?ssl=1\" alt=\"\" class=\"wp-image-685\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>24 hours record mode opened for default setting; Users can set data based on requirement and click \u201cComplete\u201d.<\/p>\n\n\n\n<p><strong>Motion detection and alarm only work when alarm function opened.<\/strong><\/p>\n\n\n\n<p>Users need to login before operation, system will offer related functions based on user authority. Default user name is: admin, no default password. The default super user authority is: admin. As picture below.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Record-Setting-2.png?ssl=1\" alt=\"\" class=\"wp-image-686\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<ul>\n<li>For safety reasons, please modify user name and password in User Management after first time login.<\/li>\n<\/ul>\n\n\n\n<p>Steps:Main Interface Right button\u2192 Main Menu\u2192 Alarm \u2192 Motion Detection\u2192 Choose Channel\u2192 Choose Enable\u2192 Set Area, Time, Sensitivity\u2192 Select Alarm Type\u2192 Choose target recording channel after motion detection triggered\u2192 Set Period in Record Setting\u2192 Set period in Custom mode, related channel recording type should be motion detection. Click \u201csave\u201d, then motion detection alarm start work, linking to recording at the same time. Video Shelter is the same way to set data.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Record-Setting-3.png?ssl=1\" alt=\"\" class=\"wp-image-687\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p><strong>Manual Record:<\/strong><\/p>\n\n\n\n<p>Main Menu Right button\u2192Manual Record\u2192Choose Channel or Choose All\u2192 Click \u201cSave\u201d<\/p>\n\n\n\n<p><strong>All channel are opened for recording in default setting.<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Manual-Record.png?ssl=1\" alt=\"\" class=\"wp-image-689\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">PoE Setting<\/h3>\n\n\n\n<p>Steps:Main Interface Right button\u2192 Main Menu\u2192 Channel Management\u2192PoE Settings <\/p>\n\n\n\n<p><strong>PoE Channel: <\/strong>Choose target channel or select \u201cAll\u201d, Click \u201cApply\u201d to save data setting,this part is the function for long distance network transmission reaching to 200M. <\/p>\n\n\n\n<p><strong>Port Status: <\/strong>Showing the connecting status of network port and power consumption. Port indication of normal connected device will be bright, power consumption will show below the port, indication of unnormal is dark. <\/p>\n\n\n\n<p><strong>Power consumption: <\/strong>Showing used power consumption of current network output,left power consumption,total rated power consumption.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/PoE-Setting.png?ssl=1\" alt=\"\" class=\"wp-image-688\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Playback<\/h3>\n\n\n\n<p>Main Menu right button\u2192Playback\u2192Choose Channel\u2192 Double click target Date\u2192 Double click timeline for to playback<\/p>\n\n\n\n<p><br>Step 1: Click Playback, default screen split is 4, auto search 4 channels video, double click timeline process bar which has video, it can show 4 devices for 2MP; If need to check other video in different time, users should stop video play, then choose channel, double click date, auto search to choose video in target date, double click timeline which has video to play. <\/p>\n\n\n\n<p>Step 2: Timeline in light blue is for manual record, in dark blue for timing record, in green for motion detection record, red for alarm record. <\/p>\n\n\n\n<p>Step 3: Stop, Pause, Speed+, Scale play, Speed- can be support during playing video; <\/p>\n\n\n\n<p>Step 4: Click <img decoding=\"async\" class=\"wp-image-691\" style=\"width: 34px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon2.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> to stop playback.<\/p>\n\n\n\n<p><strong>Please choose 1 screen when playing back 3MP video!<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Playback.png?ssl=1\" alt=\"\" class=\"wp-image-690\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Backup<\/h3>\n\n\n\n<p>Main Menu Right Button\u2192 Main menu\u2192 Record\u2192 Backup\u2192 Select channel and time, video type \u2192 Click \u201cQuery\u201d\u2192 Select file\u2192Click \u201cStart backup\u201d<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Backup.png?ssl=1\" alt=\"\" class=\"wp-image-692\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Shut Down System<\/h3>\n\n\n\n<p><strong>Logout:<\/strong> Cancel the current user, exit the menu, users need to input user name and password again next time login; <\/p>\n\n\n\n<p><strong>Reboot:<\/strong> Quit the system and restart; <\/p>\n\n\n\n<p><strong>Power: <\/strong>Close system, device not work.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/Shut-Down-System.png?ssl=1\" alt=\"\" class=\"wp-image-693\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>P2P Function for Phone<\/strong><\/h2>\n\n\n\n<p>1.Android &amp; iOS mobile should download Danale app firstly. Official download add ress: https:\/\/cameramanual.org\/danale , users can also scan the QR code below by phone to download app.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/qr-code-1.png?ssl=1\" alt=\"\" class=\"wp-image-694\" data-recalc-dims=\"1\"\/><figcaption class=\"wp-element-caption\">2. Install Danale app and open, apply an account for personal &amp; corporate usage.<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone.png?ssl=1\" alt=\"\" class=\"wp-image-695\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<ol start=\"3\">\n<li>Make sure NVR connected to WAN, please use network cable connect to NVR network port with legal IP address in LAN, setting NVR IP address in \u201cWired\u201d .<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-2.png?ssl=1\" alt=\"\" class=\"wp-image-696\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>If unfamiliar with LAN environment or under private wire network, users can select open \u201cDHCP\u201d, legal IP address will be assigned by router; If familiar with LAN environment, users can input IP address and DNS address manually.<\/p>\n\n\n\n<p>4. Turn on P2P function, click right button for main menu\u2192 Network\u2192Phone<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-3.png?ssl=1\" alt=\"\" class=\"wp-image-697\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>Select \u201cEnable\u201d and click \u201cRefresh\u201d until status shows \u201cOnline\u201d. If keeping offline after 5 minutes, step 3 may operated wrongly, NVR cannot connect to WAN. Please check step 3, make sure NVR connected to WAN.<\/p>\n\n\n\n<p>5.Add NVR device in Danale app:<\/p>\n\n\n\n<p>\u2460 After first time login app, click \u201c<img decoding=\"async\" class=\"wp-image-698\" style=\"width: 44px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon11.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> \u201dto add device, users can scan QR code.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-4.png?ssl=1\" alt=\"\" class=\"wp-image-699\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>\u2461 Users can scan device ID in popping interface, or input serial ID number manually, then name your device, click \u201cok\u201d.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-5.png?ssl=1\" alt=\"\" class=\"wp-image-700\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>6. Device preview:<\/p>\n\n\n\n<p>Users can click target device in device list. Select suitable channel to view with single screen, click \u201c<img decoding=\"async\" class=\"wp-image-701\" style=\"width: 43px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon12.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> \u201d for full screen.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-5-1.png?ssl=1\" alt=\"\" class=\"wp-image-702\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>7. Preview interface icon .<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-7.png?ssl=1\" alt=\"\" class=\"wp-image-703\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<ol start=\"8\">\n<li>Share device to others: Click \u201c<img decoding=\"async\" class=\"wp-image-704\" style=\"width: 35px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon-12.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> \u201d in preview interface, scan the target person\u2019s account QR code or input manually, click \u201cNext\u201d, set permission data, click \u201cshare\u201d.<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-9.png?ssl=1\" alt=\"\" class=\"wp-image-708\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<ol start=\"9\">\n<li>Check Hard Disk Video: In preview interface, click icon\u201d <img decoding=\"async\" class=\"wp-image-705\" style=\"width: 39px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon13.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\">\u201d, then select \u201cHard Disk Video\u201d, users can check choose channel, fingers can move on timeline to check suitable videos. For changing channels, please click \u201c<img decoding=\"async\" class=\"wp-image-706\" style=\"width: 39px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon14.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> \u201d for full screen, and then users can change channels by indication.<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-10.png?ssl=1\" alt=\"\" class=\"wp-image-707\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/P2P-Function-for-Phone-11.png?ssl=1\" alt=\"\" class=\"wp-image-709\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>PC Sofware for Remote monitoring<\/strong><\/h2>\n\n\n\n<p>You can use the danale client or the NVS client<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">NVS client instructions<\/h3>\n\n\n\n<p>Before login PC, make sure you already applied Danale ID and device has added in your mobile phone; <\/p>\n\n\n\n<p>Otherwise, you cannot log in PC and cannot find linked device( For account apply and device adding method, please refer to Part 6 above);<\/p>\n\n\n\n<ol>\n<li>Please input correct user name and password after opening NVS,select \u201cLogin P2P\u201d( phone and PC cannot online at same time, please log out on phone if need to check on PC).<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/PC-Sofware-for-Remote-monitoring.png?ssl=1\" alt=\"\" class=\"wp-image-710\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>2. After login, the left side in PC software will shoe the added list, choose 4 screens to see picture,users can click single channel or click right button for \u201cConnect All\u201d.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/PC-Sofware-for-Remote-monitoring-2-.png?ssl=1\" alt=\"\" class=\"wp-image-711\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<p>3. If not Select \u201cLogin P2P\u201d, user name: admin, password: admin, in \u201cDevice Management\u201d, users can search, add and view our company&#8217;s NVR and IPC in LAN.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/PC-Sofware-for-Remote-monitoring-3.png?ssl=1\" alt=\"\" class=\"wp-image-712\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<h2 class=\"has-text-color wp-block-heading\" style=\"color:#d0af91\"><strong>LAN monitoring by Internet Explorer<\/strong><\/h2>\n\n\n\n<ol>\n<li>User cable connect NVR network port and LAN switch. <\/li>\n\n\n\n<li>Check NVR IP address, input it in PC IE browser.<\/li>\n<\/ol>\n\n\n\n<p><strong>Make sure PC segment of IP address is the same with NVR.<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/LAN-monitoring-by-Internet-Explorer.png?ssl=1\" alt=\"\" class=\"wp-image-717\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<ol start=\"3\">\n<li>For the first-time login user, please download and install OCX file, close IE browser during installation. The default user name is: admin, no password.<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/LAN-monitoring-by-Internet-Explorer-2.png?ssl=1\" alt=\"\" class=\"wp-image-718\" data-recalc-dims=\"1\"\/><\/figure>\n\n\n\n<ol start=\"4\">\n<li>After login, click channel icon \u201c<img decoding=\"async\" class=\"wp-image-716\" style=\"width: 45px;\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/icon15.png?ssl=1\" alt=\"\" data-recalc-dims=\"1\"> \u201d to view pictures. Users also can click to configuration for data setting.<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/i0.wp.com\/cameramanual.org\/wp-content\/uploads\/LAN-monitoring-by-Internet-Explorer-4.png?ssl=1\" alt=\"\" class=\"wp-image-719\" data-recalc-dims=\"1\"\/><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>Declaration Below is the correct using method, danger prevention, property loss prevention, please do obey the rules. Installation Environment Safety Warning of Lithium Battery This device used CR2032 lithium battery, explosion may happen if using other type batteries. When changing battery, do not put used battery into fire burning household garbage, please obey the local [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":721,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","_uag_custom_page_level_css":"","_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[469],"tags":[470],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"","uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"lshowcase-thumb":false,"woocommerce_thumbnail":false,"woocommerce_single":false,"woocommerce_gallery_thumbnail":false,"jnews-360x180":false,"jnews-750x375":false,"jnews-1140x570":false,"jnews-120x86":false,"jnews-350x250":false,"jnews-750x536":false,"jnews-1140x815":false,"jnews-360x504":false,"jnews-75x75":false,"jnews-350x350":false,"jnews-featured-750":false,"jnews-featured-1140":false},"uagb_author_info":{"display_name":"Security Manual","author_link":"https:\/\/www.camapp365.com\/author\/security-manual"},"uagb_comment_info":1,"uagb_excerpt":"Declaration Below is the correct using method, danger prevention, property loss prevention, please do obey the rules. Installation Environment Safety Warning of Lithium Battery This device used CR2032 lithium battery, explosion may happen if using other type batteries. When changing battery, do not put used battery into fire burning household garbage, please obey the local&hellip;","_links":{"self":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts\/666"}],"collection":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/comments?post=666"}],"version-history":[{"count":1,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts\/666\/revisions"}],"predecessor-version":[{"id":7978,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/posts\/666\/revisions\/7978"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/"}],"wp:attachment":[{"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/media?parent=666"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/categories?post=666"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.camapp365.com\/wp-json\/wp\/v2\/tags?post=666"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}