Connect the device
Download APP
Use the “Scan” function on the mobile phone to scan the QR code to download and install the “iCam365” APP.
Connect power supply
Connect the device to the power supply.
Keep it connected for about 1 minute until hearing a prompt sound.

Add device
1.Login to iCam365″ APP
2.Add device
3. Select WiFi Camera

The APP will be constantly optimized and updated, and the interface shall be subject to the APP
4. Select Add mode For a quick add demonstration
5.Operate according to the prompt After hearing the prompt, check the box and click Next.
6.Select nearby devices

7.Select the WiF¡ that needs to be connected, and enter the password.
8.Wait for the device to configure the network
9.The device is added. Name your device

Function Description
Function | Description |
Real-time and Playback | Click the screen on the device to enter the device real-time page to view the real-time camera screen. You can also switch to Playback to view the historical video. The recording can be divided into event recording and round-the-clock recording. You can select the recording mode as required. |
Alert | The device will push an Alert message when it detects any movement or sound. You can select the type of Alert message to be received on the setting |
Pan/tilt head and talk | On the real-time page, you can adjust the orientation of the remote camera through the disk of its pan/tilt head, or push and hold the microphone to send voice to the remote camera. |
Sharing | Enter the mobile phone number of your family member on the Sharing page. The shared people shall download the APP and register. Each device can be shared by up to 10 accounts. The shared people can view the live video, talk to the camera and view the video through the pan/tilt head, but he/she cannot make settings |
Alarm | Ilt gives the voice and light alarm when detecting a movement event or a manlike shape event (purchase separately). You can also customize the voice |
Setting management | Click‘![]() ![]() you can modify device names, purchase services, share devices, access Store Settings, Screen Settings and other Settings. |
Binocular camera | If you are purchasing a binocular camera, the following function are currently supported: 1. supports the Picture-in-Picture display. You can click Picture-in-Picture to enable or disable the function. 2. supports the switch between the small picture and the big picture. Click the long shot or close shot or small picture to switch. 3. its Playback function also supports the switch between the small picture and big picture and enabling/disabling of the small picture window. |
FAQ
What shall I do if the device cannot be added?
Check if the WiFi password is correct, and if the network is connected correctly, reset the camera.Add the device again when the above operation is done.
The video cannot be playback?
The recording is divided into event recording and round-the-clock recording. Event recording:
The camera records the triggering event until its end. It keeps recording if the event keeps triggering it.
Round-the-clock recording: The camera records round the clock.
The round-the-clock recording will occupy a huge space of the memory card. Please select the recording mode as required.The path setting of the recording mode: Setting-> Memory card -> Recordina mode
How should I download the video to my mobile phone?
Click the Recording button “ ” while viewing the playback video.
Click the Stop button” ” when the playback is finished, and the video will automatically be saved to the album.
What shall I do if it is shown that the device is offline?
First, check if the power supply and the network are normal. If they are normal, power off the camera and restart it. If the device is still offline after restarted, eliminate the camera in the APP and add it again.
What shall I do if the Alert message cannot be received?
Confirm if the system has disabled the message push permission for iCam365. If it is disabled, enable the “Message notification” permission in the settings of your mobile phone.
Check if the message push is disabled in the device setting.
The Alert message can be saved for up to 7 days.
Display of no memory card
1. The camera does not support hot-plugging. You need to power off the camera to insert the memory card. Please restart the camera.
2. lf the memory card still cannot be identified after the camera is restarted, please replace it with a new cardand try again.
3. If the new card still cannot be identified, the card slot may be damaged, or there is a failure in the FFC. Contact the supplier to replace the device.
What shall I do if the memory card is full?
No need to handle it manually. The camera automatically overwrites the earliest video documents when the spare space of its memory card is 500M or less.
Works great so far other than it needs to be close to the router or else it can be laggy and require resetting sometimes. And how do you add multiple people to the camera? I have three people in my household and so far only one person can use the app at a time. If someone else logs in it kicks you off. Other than that it’s good quality I just wish it had a slightly larger picture and larger pan and swivel distance
FYI – if you have a lot of Bluetooth Devices in your Bluetooth list, delete some and it may help. Tried to “pair” my iCam365 and it initially failed. Then I remembered a previous issue with too many Devices not allowing a new Device to pair. Deleted old (no longer used) Devices, and the iCam364 paired immediately. This was on an iPhone and an iPad. We often forget how many Devices we have accrued in our Bluetooth List of Devices. Might be the same for PC stuff too.
how to get the sioftware n the computer to find the icam camera?
Did you ever get your cameras connected I am having the same problem?
new purchase of icam365 will connect tried many times whats up
icam365 fails to connect evertime i try . What can i do? HELP
icam365 setup fails everytime i try it.What can i do ?
What type of SD card does the device use?
how to you add multiple phones to one device ?
I have 2 icam365, I am fallowing all the correct step to install the camera but at the end setup fail, what can I do to connect the camera
Did you ever get your cameras connected I am having the same problem?