Have a question about your camera? Post it in the comments! Someone will probably reply to your question.
CAMAPP365
  • Home
  • Technical
  • Camera type
    • Doorbell
  • Reviews
  • Cease service
  • VIDEO
camapp365
Home EKEN

ENEK Video Doorbell MODEL V8 Aiwit app User Manual

January 1, 2023
in EKEN
20
Share on FacebookShare on Twitter
Contents hide
Manual information
ln the box
Know your device
Indicator Light
Charge batteries
Set up your Video Doorbell
Install your Video Doorbell
Trouble Shooting/ FAQ
Set up the chime (Optional)
PDF download

Manual information

Brand:EKEN

APP: Aiwit

Model:V8

Please read the instructions thoroughly before using your doorbell.
This booklet contains impor tant information that will allow you to utilize the full potential of your doorbell.

ln the box

ln the box

Know your device

Know your device

1. Microphone

2. Wide-angle Lens

3. Indicator Light

4. Motion Sensor

5. Hidden Infrared Lights

6. Light Sensor

7. DoorbelI Button

8. Speaker

9. Micro USB Port (Battery Charging)

1 0. Battery Slot

Indicator Light

Indicator Light

Indicator LightRED Indicator light flashes:

The device is connecting to your Wi-Fi, please wait

Indicator LightRED and BLUE indicator lights flash alternately

Low battery, please charge your batteries

Charge batteries

1. Remove the battery tab

Charge batteries

2. Insert batteries with the correct polarity

Charge batteries

Rechargeable 18650 Battery

3. Charge the batteries with a USB cable. A full charge takes about 8 hours.

Charge batteries

Set up your Video Doorbell

Step 1

Scan the QR codes below, or search for ‘Aiwit” on the Apple app store or Google Play. Download and install the App.

Aiwit QR code

To make sure every single feature works properly, please select ” YES ” for all permissions on your phone during the APP installation.

Step 2
Open the Aiwit App on your cellphone. Next, tap Sign up.

Step 3
Enter your email that will link with the doorbell and the password, then tap‘Sign up’

Set up your Video Doorbell

Step 4
You will receive an email with the confirmation code. Please enter the code and tap ’Confirm‘

Step5
Enter your email and password, then tap‘Log in’

Set up your Video Doorbell

Step 6
Tap the ’+‘ icon

Step7
Select ’Video Doorbell‘

Set up your Video Doorbell

Step 8
Press and hold the button located on the front of the doorbell for 8 seconds until the indicator light is flashing red. Then, tap ’Next‘

Step 9
Tap’Yes‘

Set up your Video Doorbell

Step 10
Find your Wi-F¡ (Some phones need to input manually) and enter the Wi-Fi password, then Tap ’Next‘.

Step 1 1
Scan the QR code with your doorbell camera. Keep the cellphone and doorbell 10 to 30cm apart.

Set up your Video Doorbell

Step 1 2
lf the doorbell connected with your Wi-Fi successfully, a notification will appear on your screen as shown below.
If it fails to connect with your Wi-Fi, please repeat steps 8 to 11.

Step 13
After setup, you will be able to check the live footage on your screen, and operate the doorbell with your cellphone.

Set up your Video Doorbell

lf you experience some issues during the app setup, try the following steps:

Check your Wi-Fi password.
The most common issue during setup is an incorrect Wi-Fi password, passwords are case-sensitive. Please double check
your password.

Reboot the router/ modem.
lf you have entered the correct password, but are still experiencing issues, try unplugging the power to your router/modem. Wait for 30 seconds, then plug it back in and turn it on. Proceed to setup again in the Aiwit app.

Install your Video Doorbell

When finding a place for your doorbell, please be sure that your doorbell does NOT directly face the sunlight, which may cause inaccurate notifications.

See also  EKEN Video doordell User Manual

lf installing on a masonry surface, drill holes first with a drill bit, then insert the wall anchors prior to screwing your doorbell base.
lf installing on a wooden surface, you can screw the base directly into the surface.

Install your Video Doorbell
Install your Video Doorbell

lf the surface is smooth enough, you can stick the doorbell to the surface by using the 3M tape that comes in the box.

Trouble Shooting/ FAQ

Q1. How do I enable notifications on my phone?
Go to the Aiwit app, then tap the. ’settings’ icon, turn ‘Motion Alerts’ on.

* To get the notification, you need to give the Aiwit app permissions to access your phone. If your Aiwit app does not have permissions, you need to do this first. Steps may vary for different devices. Generally, they are as indicated:

Step 1: Open ’Settings‘ on your phone. Go to ’App & Notifications‘ .
Step 2: Go to ‘App permissions’ . Make sure all options are enabled.

How do I enable notifications on my phone?

Q2. How to adjust Motion Detection Sensitivity?
From the home page, tap the ” Motion Detection” icon, then go to the ’Motion Settings’ .


Sensitivity settings decide when and how often your doorbell wakes up and starts to record. Settings range from ‘High’ to Off”.

High: Records and notifies you for almost every movement, the detection scope is around 7 meters. Which means all the movements within this area will be detected, and the doorbell will wake up and start to record a video.


Medium: Records and notifies less often.


Low: Records and notifies you even less often. The detection scope is around 1 .5 meters.


Off: Does not notify nor record.

Choosing a high sensitivity setting will decrease battery life. Under this setting, you will get the shortest battery life and frequent notifications. Under a constant state of activity, it may result in the battery running out fast.


A low sensitivity setting will make the battery last longer. Under this setting, you will get longer battery life and less amount of notifications.
You should try all the setting first, and then choose whi chever seems more fitting.

How to adjust Motion Detection Sensitivity?

Q3. How can I talk to people through the doorbell?
Open you Aiwit App, active the doorbell. Hold the ’Hold to talk‘ button to talk.

The intercom can go both ways, but only 1 person can talk at a time. When the button on your phone is held, sound from the doorbell will not be delivered to your phone. When the button on your phone is released, your voice will not be delivered to the doorbell.

*To get the intercom, you need to give the Aiwit app permissions to access your mi crophone and speaker. If your Aiwit app does not have permi ssions, you need to do this first by following the steps in Q1.

How can I talk to people through the doorbell?

Q4. How long do my videos stay in my cloud storage?
Your videos are stored in the Free Cloud for 3 days. After 3 days, your old videos will be replaced by the new ones.
lf you want a longer storage span, you can buy the extension on the App. The steps are as below.

See also  ENEK Video Doorbell MODEL T8 Aiwit app User Manual

Step1. Go to the main menu, tap the ‘ Settings’ button.
Step2. Go to the bottom, choose the ‘ Cloud Storage Service’
Step3. Select one of the options that you need.

Q5. What is the maximum time of one video?
A)For motion detection
After a movement is detected, the doorbell starts to record videos. Each video will last 15 seconds. After a recording is finished, a new video will be generated automatically. The doorbell will go to sleep when no more movements are detected.

B)For live view
When you check the live footage, a video up to 3 minutes long will be generated and be uploaded to the cloud.
The recording will end in 3 minutes. If you want to record a longer footage, you need to re-enter the doorbell after 3 minutes. Then the doorbell will record for another 3 minutes.

Q6. If the battery runs out, do I need to reconnect the doorbell with Wi-Fi manually after charging?
No, the doorbell will automatically connect to your Wi-Fi once the power is back.

When the power first comes back, the doorbell will search for your Wi-Fi once every 10 minutes. lf it does not find the Wi-Fi in the first hour, the doorbell will reduce the search down to once every 2 hours until it connects with your internet. So please be patient once the power is back.

Q7. How do I share the device with my family
Open the Aiwit app. From the home page, tap the’ Share’ icon.
Tap ‘Share via Email’ or ‘Share via QR Code’. You can share the device with up to 8 users.

Share via Email:
The new user needs to download the Aiwit app and create an account with the email address which the owner has shared with.Log into the account and you will see the shared device.

Share via QR Code:
Open the Aiwit App on a new user’s phone. From the home page, tap the + icon.
Tap QR Code Sharing, then scan the QR code on the owner ‘s phone.

You should see Share successfully being displayed, then tap Confirm.

The secondary users do not have the following permissions as the main user: set the sensitivity, change the device account, delete the videos from the cloud, or share the device with new users.

You should see Share successfully being displayed, then tap Confirm.

Q8. How many users can view the footage at the same time?
Up to 3 users may view the footage as the same time, but only 1 user can use the direct intercom. Both IOS and Android are compatible.

Q9. Why does my device often go offline?
Your device may be too far away from your wireless router or you may have some obstructions in between that reduce signal strength. You may need to try repositioning your router or getting a signal extender/repeater for your wireless router.

Q10. How long can a battery last after being fully charged?
Generally, the battery can last around 1 200 notifications.
Different temperatures can make the battery life vary.

See also  ENEK Video Doorbell MODEL V6 User Manual

Q11. Why does my battery die extremely quickly?
A) Your device may be too far away from your wireless router or you may have some obstructions in between that reduce signal strength. Your device keeps on finding and reconnecting with the signal, which drains the battery. You may need to try repositioning your router or getting a signal extender/ repeater for your wireless router.


B) You may have forgotten to exit from your Aiwit app after a live view.
lf you don’t exit from your app after a live view, the doorbell will stay on, which drains the battery.

C) If you set the the sensitivity at the ‘High’ on your app, frequent wake-ups can drain the battery.

Q12. Why does my phone not get a notification when someone presses the button?
It is likely that your phone battery is optimized, you can set the battery option to Don’ t optimize” for your Aiwit App. Steps may vary for different devices. Generally, they are as indicated:

Step1. Go to the ’Settings’ menu.
Step2.Select ‘Battery optimization’, then find the Aiwit app.
Step3. Select the app, then choose ‘Don’ t optimize’

Q13. Why does my cellphone get a delayed notification?
lf this happens when your phone is connected with your Wi-Fi router, either your Wi-Fi signal is weak, or your internet is slow.
You may need to try repositioning your router or getting a signal extender/ repeater for your wireless router.

Q14. Why do I get inaccurate notifications somet imes?/ I received a notification, but there is nothing at my door?
Your doorbell might be facing the sunlight directly, or there may be some kind of obstruction in front of it. Any sort of moment will trigger your doorbell, even shadows originating from objects such as clouds or leaves.


Q15. How to RESET network settings
Press and hold the doorbell button until the red light is flashing, then follow the in-app instructions to finish your Wi-Fi setup.


Q16.What type of Micro SD card shouldl use?
This device comes with cloud storage, SO no SD card is needed.


Q17.Does this doorbell support 5GHz Wi-Fi?
No, only 2.4GHz Wi-Fi is supported.

Set up the chime (Optional)

With the doorbell chime, you can get an instant notification in your home whenever someone rings the doorbell. You can place it anywhere in your home by plugging it into a power outlet. A chime is optional. Even if it’ s not installed, you cellphone can still receive doorbell notifications.

Set up the chime (Optional)

Step 1
Before the setup, please be sure your doorbell has connected to your phone and your chime has plugged into a outlet.

Set up the chime (Optional)
Set up the chime (Optional)

Step 2
Press the Connect Button.

Set up the chime (Optional)

Step 3
Press the Doorbell Button to pair your doorbell with the chime.

Set up the chime (Optional)

Step 4
Press the Tune Button to choose a tune.

Set up the chime (Optional)

Step 5
Press the Doorbell But ton again to make sure it’ S the tune you have chosen.

Set up the chime (Optional)

PDF download

ENEK Video Doorbell MODEL V8 Aiwit app User Manual下载
Tags: Aiwit app
Previous Post

ENEK Video Doorbell MODEL T8 Aiwit app User Manual

Next Post

SV3C Wifi camera Model PG207 yi iot app User Manual

Related Posts

ENEK Video Doorbell MODEL T8 Aiwit app User Manual

ENEK Video Doorbell MODEL T8 Aiwit app User Manual

ENEK Video Doorbell MODEL T7 Aiwit app User Manual

ENEK Video Doorbell MODEL T7 Aiwit app User Manual

ENEK Video Doorbell MODEL T5 User Manual

ENEK Video Doorbell MODEL T5 User Manual

ENEK Video Doorbell MODEL V6 User Manual

ENEK Video Doorbell MODEL V6 User Manual

EKEN Video doordell User Manual

EKEN Video doordell User Manual

Comments 20

  1. Minecraft APK says:
    3 weeks ago

    Great post! The detailed explanation of the Aiwit app features for the ENEK Video Doorbell MODEL V8 is super helpful. I appreciate the step-by-step guide on installation and troubleshooting tips. Can’t wait to set mine up!

    Reply
  2. Online Scribd Downloader says:
    6 months ago

    Thanks for the detailed user manual on the ENEK Video Doorbell MODEL V8! I found the step-by-step instructions really helpful, especially for setting up the Aiwit app. It’s great to have all this information in one place. Looking forward to exploring more features!

    Reply
  3. Beth says:
    2 years ago

    I have all the settings correct and I am not getting notifications through the camera to my phone. Quite annoying.

    Reply
  4. Juanmi says:
    2 years ago

    LIERS: I had 7 days video access for free for a life time…now they say: “Dear customer, I’m sorry for the inconvenience caused by the recent cloud service changes. Please confirm your cloud storage service plan with your direct dealer (where the equipment is purchased).
    We are a cloud storage service provider. However, the cloud storage service plan purchased by your direct dealer has expired. You need to subscribe to the cloud storage service before you can renew the cloud storage service.”

    Reply
  5. rachelle says:
    2 years ago

    i’m pissed i had 7 days video access when i first buys this video doorbell, it went to 3 days and now i can’t access any video if i don’t pay to subcribe to their cloud. I just can’t see any vido anymore !

    Reply
Next

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Search

Camera APP

Best Micro SD Card for Security camera

We think the Samsung Pro Endurance is the best choice, designed for use in security cameras to help keep your video files safe, incredibly durable, and backed by a 3-year warranty.

1. Top pick : Samsung Pro Endurance(128GB )

2. Budget pick: Sandisk High Endurance U3(64GB )

3. High Capacity Pick: Sandisk Ultra A1(128GB)

Doorbell

Without Subscription Doorbell

Camapp365 is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

  • About
  • Privacy & Policy
  • contact us
Have a question about your camera? Post it in the comments! Someone will probably reply to your question.

© 2019-2023 camapp365

No Result
View All Result
  • HOME
  • Technical
  • Camera Type
    • Doorbell
  • Reviews
  • CEASE SERVICE
  • contact us

© 2019-2023 camapp365